1. Home
  2. /
  3. Complete List of OBD2...
  4. /
  5. P0230 Code – What...

P0230 Code – What Does It Mean & How To Fix It

This is one of the most frequent OBD2 trouble codes. Read the full article below to know what it means, how to fix it, and what other codes may show related to it.


Let’s start with the definition of the P0230 DTC code before delving further into its nuances. The onboard computer (ECU) of your car uses DTC codes, which are defined codes, to signal certain problems. The primary fuel pump circuit and the fuel pump relay circuit are both included in the P0230 error code.


In order to diagnose and resolve the problem, it is crucial to understand what P0230 means. The problem with the fuel pump circuit or the relay that controls it is usually indicated by this code. Failures in these components can lead to insufficient fuel delivery, which may affect your vehicle’s performance and efficiency.


Let’s investigate the common reasons P0230 occurs now that we are aware of what it indicates. Possible offenders include:

  • Defective Fuel Pump: This code may appear if the fuel pump is damaged or inoperative. It can fail to provide the engine with the necessary fuel pressure.
  • Inadequate Fuel Pump Relay: The relay for the fuel pump is in charge of turning on the fuel pump. This procedure may be hampered by a malfunctioning re
  • Wiring or Connection Issues: The gasoline pump circuit may experience P0230 due to corroded or damaged wiring, shoddy connections, or loose terminals.


The P0230 code’s associated symptoms might help you quickly locate the problem. Typical signs include:

  • Lower Engine Performance: Your car can have trouble accelerating or have less power.
  • Stalking: Unexpected engine stalling or turning down is possible.
  • Difficulty Starting: Due to low fuel pressure, you may have trouble starting your car.


In order to correctly solve the P0230 code, an accurate diagnosis is essential. It is possible to determine the precise issue by consulting an expert mechanic or using a diagnostic tool. In order to determine the root cause, they will normally carry out fuel pump, relay, and associated component tests.

Common mistakes

In order to avoid unnecessary expenses and waste of time, it is important that certain errors are avoided in the diagnostic and repair processes. Misdiagnosis of the problem as a faulty fuel pump when the relay is the actual cause of the problem or neglecting to check for the problem with the wires, are some of the common errors.

How serious is this?

It is essential to understand the severity of the P0230 code. While your vehicle may still be running, ignoring these issues can lead to further damage, reduced fuel efficiency, and potentially dangerous situations such as stalling on the road. This is something that needs to be addressed immediately.

What repairs can fix the codeS?

repair manuals

Depending on the underlying problem, a number of remedies can resolve the P0230 error code after diagnosis. Possible fixes might be:

  • If the fuel pump is determined to be defective, replace it.
  • Changing the relay for the fuel pump
  • Replacing or repairing faulty connections or wiring in the fuel pump circuit.

Related codes

The related diagnostic trouble codes (DTCs) for P0230 are often variations of P0230 itself, indicating specific issues within the fuel pump circuit or relay control circuit. Here are the codes closely related to P0230:

  • P0231 – Fuel Pump Secondary Circuit Low:** This code indicates that the fuel pump secondary circuit is experiencing low voltage or an electrical problem. It’s closely related to P0230 and may point to issues with the fuel pump relay or wiring.
  • P0232 – Fuel Pump Secondary Circuit High:** In contrast to P0231, this code suggests that the fuel pump secondary circuit is experiencing high voltage. Again, it could be due to problems with the fuel pump relay or wiring.
  • P0233 – Fuel Pump Secondary Circuit Intermittent:** This DTC indicates an intermittent issue in the fuel pump secondary circuit. It may not be a constant problem but rather an occasional electrical disruption.

These related codes provide more specific information about the nature and location of the problem within the fuel pump circuit or relay control circuit. When diagnosing and addressing these issues, it’s essential to consider these related codes to ensure an accurate and thorough repair.


Finally, the P0230 DTC codes indicate that there is a problem with the fuel pump circuit or relay. Failure to observe this code may lead to a deterioration in vehicle performance and possible hazardous situations.

You will be able to effectively solve this problem and ensure your car is running smoothly again by understanding its meaning, common causes, symptoms, and the necessary repairs. If the P0230 code is encountered, seek professional help as soon as possible to diagnose and solve this problem.

P0230 Code – What Does It Mean & How To Fix It